€ 4100
shop now


No CI slot, just an internal cardreader for your smartcard


RE-2020HD S-PVRNo ‘bells and whistles’

USB sticked recordings

1 USB-port
Auto FST update

low priced performancesatellite platform

The M7 Group/Canal Digitaal announced to us that the usage of a single smartcard in an internal cardreader, such as in case of this RE-2020HD PVR model, will no longer be supported.
The exact starting date of this was not known yet. Maybe end 2021/begin 2022. Or a while later.
If it has a negative impact on áll scrambled services is also still uncertain.
Needless to say of course that free to air services are not affected.
Never the less we decided to lower the price to only ‘a few bucks’.

The Rebox RE-2020HD S-PVR was invented because of this market-driven question:
Wouldn’t it be possible to create a receiver without all those (internet based) ‘bells and whistles’.
Just a simple, straight forward, single tuner for watching satellite television.
Preferable 12 Volt, so it also can be used on the camping, boat, etc.

.. not only for the camping ..

because of the 12 Volt character
ofcourse it’s very popular on
camping or boat,
but what about the study or bedroom


215 mm x 160 mm x 40 mm
1 USB 2.0
Single Tuner


  • Digital Satellite receiver & PVR
  • Powerful Compatibility through Embedded Linux OS
  • Recording & Playback with External USB stick
  • Event Recording by EPG
  • Fully compliant with DVB-S2
  • DiSEqC Control Version 1.2 compatible
  • Multi-Satellite Search
  • On-Screen Display
  • Favorite Service Groups
  • Powerful Service Control by Favorites, Lock, Skip, Move and Delete
  • User Friendly & Multi-language Supported OSD/Menu
  • Teletext / Subtitle Supported
  • Maximum 4000 Services Programmable
  • Parental Lock / System Lock / Installation Lock
  • HDMI Video & Audio Output (576i, 576p, 720p, 1080i, 1080p)
  • H.264 / MPEG4 – HD,SD / DVB-S2 Tuner
  • 1 USB 2.0 Host ports
  • RCA audio/video output
  • S/P DIF coaxial output
  • 1 Smart Card Reader

tuner & channel

Input Connector IEC 169-24, Female
Frequency Range 950MHz ~ 2150MHz
Input Impedance 75Ω, unbalanced
Signal Level -25 to 65 dBm
LNB Power 13.5/18.5V DC, max.500mA Overload protected
22KHz Tone (22±2)KHz, (0.6±0.2)V
DISEqC Control version 1.2 compatible
Demodulation QPSK
Input Symbol Rate 2 ~ 45 Ms/s
FEC Decoder Convolution Code Rate 1/2, 2/3, 3/4, 5/6, 7/8 with constraint length K=7

transport stream

Profile Level support up to level 30 of Main Profile
Input Rate Max. 60Mbit/s
Aspect Ratio 4:3 / 16:9
Video Resolution 720 x 576i, 720 x 576p, 720 x 480i, 720 x 480p, 1280 x 720p, 1920 x 1080i, 1920 x 1080p
Audio Decoding MPEG1 / MusiCam Layer I&II
Audio Mode Signal channel / Dual channel joint Stereo
Sampling Rate 32KHz, 44.1KHz and 48KHz

main system

Main Processor M88CS6001-D
Flash Memory 4MB

audio video

RCA CVBS Video Output, Audio L, R Output
HDMI Video & Audio Output
S/P DIF Coaxial
Video Resolution 576i, 576p, 720p, 1080i, 1080p

front panel

Slot 1 Smart Card Slot
Display 4 Digit
Buttons 1x Power/Standby, 2x Channel, 2x Volume, 1x Menu, 1x OK
Indicators 2 LEDs (Standby, Remote)

power supply

Input Voltage AC 90-250V~, 50/60Hz
Power Consumption Max. 12W
Protection Separate Internal Fuse & Lighting protection

physical specification

Size (W x H x D) 215mm X 40mm X 160mm
Weight (Net) 1120 gr.
Operating Temp. 0°C ~ +40°C
Storage Temp. -30°C ~ +80°C

We’re always finding innovative ways to make your experience of our devices all the more enjoyable. So when we have something new to share from firmware updates to new plugins, you’ll be able to download them here.

Helpful guides

  • Product manuals
  • Handleiding Rebox RE-2020HD S-PVR - NL

    5 MB Download


  • Firmware
  • RE-2020HD S-PVR v1.17

    2 MB Download Information

    Release notes

    In deze software update ( versie 1.17), is het volgende veranderd:  
    • Zenderlijst volgorde in Timer opname menu aangepast conform Canal Digitaal zenderlijst
    Update procedure: Download dit bestand en zet het op een FAT32 geformatteerde USB stick, en steek de stick in de ontvanger. Klik op de menu knop, en ga naar het USB menu. In beeld zie je regel "C:" Klik OK In het volgende scherm zie je het software bestand (een .img bestand). Klik weer op de OK button van de RCU (afstandsbediening). Een popup schermpje verschijnt: "select which one" Kies voor "upgrade app code". Klik OK. Klik tot slot OK voor Update, of Exit om dit te cancelen. In beeld verschijnt: UPGRADE_DOWNLOAD Let op! Onderbreek dit proces niet! De ontvanger herstart zichzelf, Geef de ontvanger een reset naar fabrieksinstellingen vanuit het menu. Zet de ontvanger 10 sec uit mbv de schakelaar achterop. Start de ontvanger weer op, en lees een nieuwe zenderlijst in.